Best RV leveling blocks: Our top picks and how to level your rig

Leveling keeps your fridge, slides, and sleep in order. Here are our top RV leveling blocks and levelers, and how to level your rig.

RV parked on leveling blocks at a gravel campsite with additional leveling gear beside the rig
Affiliate disclosure

We may earn a commission from links on this page, at no cost to you. As an Amazon Associate we earn from qualifying purchases. Learn more

The best RV leveler for most people is the Andersen Camper Leveler: you drive onto it, stop when the rig reads level and chock it in place, with no stacking or guessing. If you would rather spend less, a set of interlocking Lynx Levelers is the best value and also works under jacks and stabilizers.

Leveling is not just about comfort, though a rig that tilts will drive you crazy at night. A camper that sits level keeps the doors and slides working right, lets your absorption fridge cool properly, and helps the holding tanks drain.

Which leveler you want comes down to how much you are willing to spend and whether you prefer stacking blocks or driving on a ramp. Below are the picks, the two types explained, and how to level your rig step by step.

Best forOur pickType
Best overall (easiest, fastest)Andersen Camper Leveler (2-pack)Drive-on curved ramp
Best value (most versatile)Lynx Levelers (10 blocks)Interlocking blocks
Also good (light trailers)Camco Leveling Blocks 10-packInterlocking blocks
The quick verdict: If you can spend a bit more, get the Andersen Camper Leveler. You drive on, stop at the height you need and chock it, with no stacking. If you want the most versatile kit for the money, get interlocking blocks like the Lynx Levelers, which also work under jacks and stabilizers. Either way, add wheel chocks. They are not optional.

Why leveling your RV matters

A level rig is more than a nicety. Several important systems only work right when your camper sits flat.

Your fridge is the big one. Many RV refrigerators use absorption cooling, which relies on gravity to circulate the coolant, so parking badly off-level can hurt cooling and, over time, damage the fridge.

Level also means your doors and slide-outs operate smoothly, your holding tanks drain fully, and you sleep without sliding to one side of the bed. It takes a few minutes to get right and it improves the whole stay.

The two types of RV levelers: blocks and drive-on ramps

Nearly every leveler falls into one of two camps. They do the same job in different ways, and the right one depends on how much fuss you will tolerate.

Interlocking blocks: stackable plastic squares (like oversized toy building blocks) that you build into a ramp, drive onto, and stop on. They are cheap and versatile: they work under single or dual tires, under tongue jacks, and under stabilizers. The trade-off is that you have to guess the height, stack them, and sometimes restack.

Drive-on curved levelers: a one-piece curved ramp like the Andersen. You drive up until the rig reads level, then wedge the included chock to lock it there. No stacking and no math, which is their main appeal, but they cost more.

The best RV leveling blocks and levelers

Here are our picks, from the easiest drive-on leveler to the simplest blocks. Start with the one that fits your budget and patience.

Best overall for easy leveling: Andersen Camper Leveler

If you want leveling to take seconds and zero guesswork, the Andersen Camper Leveler is the one to buy. You place it in front of the low-side tire, drive up until your level (or your RV’s leveling display) reads flat, and slide the included chock in to lock the height.

There is no stacking and no second try. It sets any height from 1/2 inch to 4 inches and works on rigs up to 30,000 pounds with tires up to 32 inches tall, so it suits everything from a small trailer to a big fifth wheel.

You put one under each low-side tire, so a tandem-axle trailer (two axles, two tires per side) needs two. That is why the 2-pack is the common buy.

Pros

  • Drive on and stop when level, no stacking
  • Precise height, no guessing or restacking
  • Works on rigs up to 30,000 pounds
  • Each leveler comes with a chock, and this kit adds grip mats

Cons

  • Costs more than a set of blocks
  • Tandem axles need two, so buy the 2-pack
  • Can slip on smooth surfaces without the mat
Andersen Camper Leveler (2-pack)
$115.98 as of Nov 21, 3:04 AM UTC · Details
Best overall · easiest leveling

Andersen Camper Leveler (2-pack)

Drive on, stop when level, and lock it in seconds. No stacking or math, for rigs up to 30,000 pounds. The easiest way to level a rig.

Check price ›

Best interlocking blocks: Lynx Levelers

For most RVers, a 10-block set of Lynx Levelers is the smartest all-around buy. The interlocking blocks stack into a sturdy pyramid ramp and lock together so they do not spread out under the weight of your rig.

They are the most versatile tool in the bay: use them to build a ramp for the low-side tires, to shim under a tongue jack, or to give stabilizer jacks a solid base. The blocks are made to hold up to 40,000 pounds. Tri-Lynx recommends no more than five blocks (about 5.5 inches) in a leveling ramp, so a 10-block set builds two ramps; buy a second set if you also want blocks under your jacks.

Lynx Levelers (10 blocks plus cap)
$33.18 as of Nov 21, 4:31 AM UTC · Details
Best value · most versatile

Lynx Levelers (10 blocks plus cap)

Sturdy interlocking blocks that stack into a locking ramp and work under tires, jacks, and stabilizers. The best all-around value.

Check price ›

Also good: Camco Leveling Blocks

If you have a lighter trailer, the Camco Leveling Blocks 10-pack does the same basic job. They are classic interlocking blocks, and they stack and lock the same way the Lynx do.

The difference is the weight rating: this Camco set is listed with a 4,000-pound capacity, far below the Lynx rating. That makes it a fit for small, light trailers. For anything heavier, stick with the Lynx.

Camco Leveling Blocks (10-pack)
Also good · light trailers

Camco Leveling Blocks (10-pack)

Classic interlocking blocks: stack, lock and drive on. A simple option for small, light trailers.

Check price ›

Do not forget wheel chocks

Leveling lifts your rig; chocks keep it from rolling. They are a safety essential, not an accessory, and you should set them every time you park.

Use standard wheel chocks on both sides every time. For travel trailers with two axles close together, an X-Chock is a useful add-on: it ratchets outward between the two tires on each side to stop them shifting, which makes the trailer feel steadier inside.

It adds stability. It does not replace your wheel chocks.

X-Chock wheel stabilizer (pair)
$74.18 as of Nov 21, 3:04 AM UTC · Details
Useful add-on

X-Chock wheel stabilizer (pair)

Ratchets between tandem tires to stop them shifting and steady the trailer. Use it with wheel chocks, not instead of them.

Check price ›

How to choose RV leveling blocks

Three questions settle which leveler is right for you. Run through them and the choice is usually clear.

  1. Blocks or drive-on ramp If you value simplicity over saving money, get the drive-on Andersen. If you want to spend less and get the most versatile option, get interlocking blocks.
  2. How heavy your rig is Big fifth wheels and motorhomes need a leveler made for the weight. The Andersen works on rigs up to 30,000 pounds, and Lynx blocks are made to hold up to 40,000 pounds. Check the rating on any leveler before you buy.
  3. How much you value your time If you camp often and hate re-parking to restack blocks, the seconds the Andersen saves add up fast. Occasional campers do fine with blocks.

How to level your RV, step by step

Level side-to-side first, then front-to-back. These steps are for towable RVs leveled by hand; if your motorhome has automatic or hydraulic leveling jacks, follow its instructions instead.

  1. Check which way it leans Set a level inside on the floor, or use a phone app, to see which side and end are low. Level the side-to-side tilt before anything else.
  2. Raise the low side Place your blocks or Andersen leveler in front of the low-side tires, then pull forward or back onto them until the rig reads level across. On a tandem axle, lift both tires on that side.
  3. Chock the wheels Once the side-to-side is right, set your wheel chocks on both sides before you unhitch or touch the jacks. This is the safety step, so never skip it.
  4. Level front-to-back Use the tongue jack (travel trailer) or the landing gear (fifth wheel) to raise or lower the front until the rig is level end to end. Put a block under the jack foot on soft ground.
  5. Drop the stabilizers Lower the stabilizer jacks until they are firm, resting on blocks if the ground is soft. Stabilizers steady the rig; they are not meant to lift or level it.

The bottom line

Match the leveler to your patience and budget. For most RVers, the Andersen Camper Leveler is the best overall pick: drive on, stop when level and chock it in seconds.

If you would rather spend less, a set of interlocking blocks like the Lynx Levelers is the most versatile value, and Camco blocks suit small, light trailers. Whichever you choose, pair it with wheel chocks and level side-to-side before front-to-back.

Kitting out the rest of your rig? See our RV gear guides, including the best RV sewer hose and best RV water filter.

About the author

Jason Newman

Jason Newman writes rvtime.com’s rental, buying and gear guides. He checks prices, specs and rules against manufacturers, rental platforms and official sources, and lists every source at the end of each guide.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com at the time of purchase will apply to the purchase of this product.

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.